Crochet Bobbles and Picots Border

Add a colorful and fun touch to your handmade blankets with this crochet “bobbles and picots” border.

Border of the Woodland Granny Square Baby Blanket - Raffamusa Designs

This crochet edging is the one I used to finish my Woodland Baby Blanket, which I made using the basic simple circle granny square design transformed into a number of different forest animals, trees, mushrooms, etc.

Border of the Woodland Granny Square Baby Blanket - Raffamusa Designs

Since the basic square pattern is the same, this crochet border will work perfectly for any granny square blanket you’ll make using one of my unique collections:

Save this pattern for later by pinning it to your best crochet border on Pinterest using this pin.

Crochet Bobbles and Picots Border - Raffamusa Designs

Note: this post contains affiliate links. If you purchase something through the links on my blog, I might earn a commission. This will not have any effect on the price you pay. For more info, please, see my Privacy Policy.

Materials

You can use the same yarn and hook that you used to crochet your blanket or project.

For this tutorial, I used:

  • 4.0-mm (G/6 US, 8 UK) Crochet Hook
  • DK (3, Light) Weight Yarn
  • Tapestry Needle

Yarn

I used Paintbox Yarns Simply DK (302 yds / 276 m per 100 g) in the following colors:

  • Cream – Vanilla Cream (107)
  • Dark Green – Grass Green (129)
  • Light Green – Lime Green (128)
  • White – Champagne White (102)

Abbreviations (US Terms)

  • Bobble – Bobble Stitch
  • Ch – Chain
  • Dc – Double Crochet
  • Picot – Picot Stitch
  • RS – Right Side
  • Sc – Single Crochet
  • Sl St – Slip Stitch
  • St – Stitch
  • Yo – Yarn over

Special Stitches

Bobble Stitch (Bobble)
Yo, insert your hook in the next st, yo, pull up a loop. Yo, pull through 2 loops on your hook (2 loops on your hook). (Yo, insert hook in the same st, yo, pull up a loop. Yo, pull through 2 loops on your hook) 4 times (6 loops on your hook). Yo, pull through all 6 loops on your hook.

Picot Stitch (Picot)
Ch 3, sl st in the back bump of the first ch.

Pattern Notes

  • If the pattern says “dc 2”, you have to crochet 1 dc in each of the next 2 sts.
  • (…) – Repeat the instructions within round parentheses for the indicated number of times.
  • […] – Crochet the instruction within brackets in the same indicated st.
  • The st count is indicated within parentheses at the end of each round’s instructions.
  • *…, **…, ˜…, ˜˜… – Repeat the instructions from *, **, ˜, or ˜˜ for the indicated number of times.

Sizes

  • The instructions and stitch counts are indicated for the baby, lapghan, and crib-sized blankets as X (Y, Z) times and (X sts), (Y sts), (Z sts) respectively.
Crochet Woodland Granny Square Blanket - Layout and Sizes - Raffamusa Designs

Bobbles and Picots Edging – Free Crochet Pattern

RS facing, with your 4.0-mm hook, join cream in the top, right ch-1 corner sp.

Round 1

[Sc 1, ch 1, sc 1] in the same ch-1 sp as joining (photo 1), *sc 21, sc 1 in next ch-1 sp, sc 1 on the side of sl st join between squares, sc 1 in the next ch-1 sp (photo 2). Repeat from * 5 (6,7) times. Sc 21, [sc 1, ch 1, sc 1] in the next ch-1 corner sp.

Bobbles and Picots Border - Crochet Tutorial 1-2 - Raffamusa Designs

**Sc 21, sc 1 in next ch-1 sp, sc 1 on the side of sl st join between squares, sc 1 in next ch-1 sp. Repeat from ** 6 (8, 9) times. Sc 21˜˜, [sc 1, ch 1, sc 1] in the next ch-1 corner sp.

Repeat everything between * and ˜˜ once more. Sl st in initial sc to join.

(143 sts on short sides, 167 sts on long sides, 1 ch-1 sp at corners) (167 sts on short sides, 215 sts on long sides, 1 ch-1 sp at corners) (191 sts on short sides, 239 sts on long sides, 1 ch-1 sp at corners)

In short…
Round 1. Sc in each sc. At each joining point between squares, sc 1 in ch-1 sp of the first square, sc 1 in correspondence to the zipper join, sc 1 in ch-1 sp of the next square. At the corners, [sc 1, ch 1, sc 1] in ch-1 sp. Sl st in first sc to join.

Fasten off cream.

RS facing, with your 4.0-mm hook, join light green in any ch-1 corner sp.

Round 2

Ch 4 (counts as a dc and a ch-1 sp), [dc 2] in same ch-1 sp as joining, dc in each st all around. At the corners, [dc 2, ch 1, dc 1] in each ch-1 sp. When you’re back at the initial corner, dc 1 in same ch-1 sp as joining, sl st in third-made ch to join.

(147 sts on short sides, 171 sts on long sides, 1 ch-1 sp at corners) (171 sts on short sides, 219 sts on long sides, 1 ch-1 sp at corners) (195 sts on short sides, 244 sts on long sides, 1 ch-1 sp at corners)

Fasten off light green.

Bobble Row

RS facing, with your 4.0-mm hook, join white in the fourth st on either side of the blanket. Ch 2 (counts as first dc of first bobble, photo 3).

Repeat this row on each side of the blanket!

Complete first bobble: (yo, insert hook in the same st as joining, yo, pull up a loop. Yo, pull through 2 loops on your hook) 4 times. Yo, pull through all 5 loops on your hook (photo 4).

Bobbles and Picots Border - Crochet Tutorial 3-4 - Raffamusa Designs

*Ch 3, sk 3, bobble 1 (photo 5). Repeat from * 36 (42, 48) times on the short sides of the blanket, or 42 (54, 60) times on the long sides. Leave the remaining 3 sts of the side unworked. Fasten off.

(36 bobbles on short sides, 42 bobbles on long sides) (42 bobbles on short sides, 54 bobbles on long sides) (48 bobbles on short sides, 60 bobbles on long sides)

Photo 6 shows what the corners will look like.

Bobbles and Picots Border - Crochet Tutorial 5-6 - Raffamusa Designs

Round 3

RS facing, join dark green in the top, right ch-1 corner sp of round 2.

[Sc 1, ch 1, sc 1] in same sp as joining (photo 7), sc 3 (photo 8), *sc 1 in the next bobble (photo 9), sc 3 working on the sts from round 2 and crocheting over the ch-3 sp from the bobble row (photos 10-11). Repeat from * 36 (42, 48) times. At the last repeat, crochet the last 3 sc over the tail of the last bobble to anchor it (photo 12). [Sc 1, ch 1, sc 1] in the next ch-1 corner sp.

Bobbles and Picots Border - Crochet Tutorial 7-12 - Raffamusa Designs

Sc 3, **sc 1 in next bobble, sc 3 working on the sts from round 2. Repeat from ** 42 (54, 60) times˜˜. [Sc 1, ch 1, sc 1] in the next ch-1 corner sp.

Repeat everything between * and ˜˜ once more. Sl st in initial sc to join.

(149 sts on short sides, 173 sts on long sides, 1 ch-1 sp at corners) (173 sts on short sides, 221 sts on long sides, 1 ch-1 sp at corners) (197 sts on short sides, 246 sts on long sides, 1 ch-1 sp at corners)

Round 4

Ch 1 (does not count as a st), [sc 1, ch 1, sc 1] in next ch-1 sp, sc 4, *[sc 1, picot 1, sc 1] in next st, sc 3. Repeat from * 36 (42, 48) times. Sc 1, [sc 1, ch 1, sc 1] in next ch-1 corner sp.

Sc 4, **[sc 1, picot 1, sc 1] in next st, sc 3. Repeat from ** 42 (54, 60) times, sc 1˜˜. [Sc 1, ch 1, sc 1] in the next ch-1 corner sp.

Repeat everything between * and ˜˜ once more.

Sl st in initial sc to join.

(187 sc sts and 36 picots on short sides, 217 sc sts and 42 picots on long sides, 1 ch-1 sp at corners) (217 sc sts and 42 picots on short sides, 277 sc sts and 54 picots on long sides, 1 ch-1 sp at corners) (247 sc sts and 48 picots on short sides, 307 sc sts and 60 picots on long sides, 1 ch-1 sp at corners)

Fasten off and weave in all your ends.

Your crochet bobbles and picots border is ready!

I hope you liked this border pattern! Please, share your projects on Facebook or Instagram using the hashtag #raffamusadesigns

Find more borders and edgings here on the blog…

Leave a Comment